Modeling of drug molecule orientation within a receptor cavity in the BiS algorithm framework

The BiS algorithm is suggested for modeling the drug molecule orientation within a receptor cavity. It is based on the assumption of complementarity of the field created by biologically active compounds and the field of the responsive receptor. The comparison of predicted orientations of various biologically active compounds on the relevant receptors with the data of X-ray structural studies (Protein Data Bank) reveals that the results obtained with this approach surpasses those reported in the literature. The suggested technique made it possible to elucidate the details of the action mechanism of DNA antimetabolites, dihydrofolate reductase inhibitors. The dependence of the activity on the structural parameters of “ligand-receptor” complexes is determined.     

Magnetic pole pinning at rectangular defects on MnAs/GaAs(0 0 1)

Strong magnetic poles at characteristic rectangular defects have been observed using a magnetic force microscope on a MnAs(  1 0 0) thin film with the thickness of 30 nm. The MnAs thin film was epitaxially grown on a GaAs(0 0 1) substrate. The magnetic poles were in one-arranging direction, being independent of the magnetization direction of the film. The poles were pinned at the edges of the rectangular defects until just below the Curie temperature, and formed a stable magnetic-field loop on the MnAs surface. The stability of the magnetic pole pinning shows the distinctive feature of the magnetic domain structure on the surface with a strong anisotropy, which was built in the heterostructure of MnAs and GaAs.     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

Rashba polarization in HgCdTe inversion layers at large depletion charges

The Rashba effect in metal–insulator–semiconductor (MIS) structures based on zero-gap HgCdTe is investigated experimentally and theoretically over a wide doping range N_A–N_D=3×10¹⁵–3×10¹⁸ cm⁻³. Increase of doping enlarges the magnitude of the effect at the same 2D concentration and strengthens a gate-voltage dependence of the Rashba splitting. The results demonstrate values of Rashba polarization as high as P_R0.5 and a capability to control the Rashba effect strength at constant electron concentration.     

Analogues of Coherent and Dissipative Structures in Social and Historical Processes

An analogy between social and hydrodynamic processes is developed. The relation of the state system to the passionarity theory suggested by L. N. Gumilev is discussed.     

Über Sesquiselenide der Lanthanoide: Einkristalle von Ce2Se3 im C‐, Gd2Se3 im U‐ und Lu2Se3 im Z‐Typ

On Sesquiselenides of the Lanthanoids: Single Crystals of C‐type Ce₂Se₃, U‐type Gd₂Se₃, and Z‐type Lu₂Se₃ Single crystals of lanthanoid sesquiselenides (M₂Se₃; here: M = Ce, Gd, Lu) are accessible through conversion of the elements (lanthanoid and selenium) in molar ratios of 2:3 within seven days at 850 °C from evacuated silica ampoules if equimolar amounts of NaCl serve as a flux. In the case of Ce₂Se₃ (a = 897.74(6) pm) und Gd₂Se₃ (a = 872.56(5) pm) the cubic C‐type (I4¯3d, Z = 5.333) forms as dark red beads, whereas the orthorhombic Z‐type (Fddd, Z = 16) emerges for Lu₂Se₃ (a = 1125.1(1), b = 798.06(8), c = 2387.7(2) pm) as orange‐yellow bricks. Upon oxidation of monochloride hydrides (MClH_x or A_yMClH_x; M = Ce, Gd, Lu; x = 1; A = Li, Na; y = 0.5) with selenium in arc‐welded tantalum ampoules the same main products appear with C‐Ce₂Se₃ and Z‐Lu₂Se₃, even with a surplus of NaCl or LiCl as fluxing agent. In the case of Gd₂Se₃, however, black‐red needles of the orthorhombic U‐type (Pnma, Z = 4; a = 1118.2(1), b = 403.48(4); c = 1097.1(1) pm) are yielded instead of C‐Gd₂Se₃. C‐Ce₂Se₃ crystallizes in a cation‐deficient Th₃P₄‐type structure (Ce₂S₃ type) according to Ce_2.667□_0.333Se₄ (Z = 4) or with Z = 5.333 for the empirical formula Ce₂Se₃. Here, Ce³⁺ is coordinated by eight Se^2— anions trigon‐dodecahedrally. In U‐Gd₂Se₃ (U₂S₃ type) two crystallographically independent Gd³⁺ cations with coordination numbers of 7 (Gd1) and 7+1 (Gd2), respectively, are present, exhibiting mono‐ or bicapped trigonal prisms as coordination polyhedra. The crystal structure of Z‐Lu₂Se₃ (Sc₂S₃ type) shows two different Lu³⁺ cations as well, which now both reside in octahedral coordination of six Se^2— anions each.     

Photonic crystals--a step towards integrated circuits for photonics.

The field of photonic crystals has, over the past few years, received dramatically increased attention. Photonic crystals are artificially engineered structures that exhibit a periodic variation in one, two, or three dimensions of the dielectric constant, with a period of the order of the pertinent light wavelength. Such structures in three dimensions should exhibit properties similar to solid-state electronic crystals, such as bandgaps, in other words wavelength regions where light cannot propagate in any direction. By introducing defects into the periodic arrangement, the photonic crystals exhibit properties analogous to those of solid-state crystals. The basic feature of a photonic bandgap was indeed experimentally demonstrated in the beginning of the 1990s, and sparked a large interest in, and in many ways revitalized, photonics research. There are several reasons for this attention. One is that photonic crystals, in their own right, offer a proliferation of challenging research tasks, involving a multitude of disciplines, such as electromagnetic theory, nanofabrication, semi-conductor technology, materials science, biotechnology, to name a few. Another reason is given by the somewhat more down-to-earth expectations that photonics crystals will create unique opportunities for novel devices and applications, and contribute to solving some of the issues that have plagued photonics such as large physical sizes, comparatively low functionality, and high costs. Herein, we will treat some basics of photonic crystal structures and discuss the state-of-the-art in fabrication as well give some examples of devices with unique properties, due to the use of photonic crystals. We will also point out some of the problems that still remain to be solved, and give a view on where photonic crystals currently stand.     

Positive value of information in games

We exhibit a general class of interactive decision situations in which all the agents benefit from more information. This class includes as a special case the classical comparison of statistical experiments à la Blackwell. AMS 2000 Subject Classification:Primary 91A35.The work of Bruno Bassan and Marco Scarsini was partially supported by MIUR-COFIN. The authors express their thanks to Sylvain Sorin for enlightening comments.     

Rigid nitronyl-nitroxide-labelled anchoring molecules: syntheses, structural and magnetic investigations

The syntheses of two rigid organic molecular rods bearing a nitronyl-nitroxide radical and a terminal nitrogen-based functionality like a pyridine or a cyano group are reported. Both new paramagnetic molecules are fully characterized, including crystal structure analysis. Furthermore their magnetic behaviours in the crystalline state are investigated and their spin concentration corroborate their excellent purity. While the pyridine functionalized rod is synthesized by converting the corresponding benzaldehyde to the phenyl-nitronyl-nitroxide radical, the synthesis of the cyano functionalized rod demonstrates the accessibility of highly sophisticated spin-labelled molecules via cross-coupling reaction with a meta-iodo-phenyl-nitronyl-nitroxide moiety.